-
£45.14 – £773.84
The self-adhesive PVC heating mat system is low-build and suitable for tile and stone floors.
The PVC heating mat system is ideal for installations within regularly shaped areas, where 0.5m wide self-adhesive mats can be quickly rolled out across the floor in parallel runs. The heating cable is attached through a series of loops to a thin but tough fibreglass mesh for rapid installation. This system is available in a choice of 150 and 200W/m² heat outputs to accommodate different requirements.
This system is suitable for all applications, providing primary or secondary heating in all rooms or projects that adheres to building regulations.
Warranty
- 10 years
Delivery £25 within Great Britain (mainland only)
Compare -
£50.39 – £330.73
The perfect solution for awkwardly shaped rooms, SunStone’s Loose Wire System allows you to wriggle the heating cable around all permanent objects and get into places a rectangular heating mat cannot.
Specifically designed to be used under stone and ceramic tiles, the Loose Wire System sits within the layer of flexible tile adhesive below the tile or stone floor finish. Alternatively, the system can be installed within a layer of self-levelling compound below the floor surface.
The heat output of the Loose Wire System can vary depending on your needs. For example, at 80mm spacing between each line of cable throughout the room, the SunStone system will produce 150W per square meter. If you feel that your room will require a stronger heat output, this can be increased simply by reducing the spacing between each line of cable. You will need to be sure to contact ElectricWarmth beforehand for advice on cable spacing and size of heater to fit your room and output needs.
Suitable mainly for bathrooms, kitchens and conservatories, the Loose Wire System comes with a 10-year warranty to ensure long term comfort and reassurance.
Warranty
- 10 years
Delivery £25 within Great Britain (mainland only)
Compare -
£108.60 – £133.97
The ideal solution for reducing your heating costs: SunStone insulation boards prevent heat-loss downwards, this means that the heat produced by your underfloor heating system is retained in the room for longer. Therefore, you use your heating less frequently or for shorter periods of time.
Insulation boards come in various different sizes and forms; cement coated or uncoated. The cement coated insulation boards come in 6mm, 10mm and 20mm sizes. The uncoated boards come in 10mm and 20mm only. The material of the insulation boards is easy to cut through with a utility knife, which makes shaping the boards to the different forms of your room effortless and ensures perfect insulation across the entirety of the floor.
SunStone Insulation boards can be attached to either concrete or timber subfloors, providing the flexibility you need to increase insulation levels throughout your home. Furthermore, your underfloor heating system can be installed directly on top of the insulation boards without any additional preparatory work required.
Once installed, the Insulation boards can reduce your running costs of your underfloor heating by up to 50%. This is achieved by preventing the heat from escaping downwards. Therefore, the heat is directed in an upward fashion only, meaning that the room remains warm much longer and the heating system requires less time to bring the room to your comfort temperature.
Size Guide
- Cement board size – 1200 mm * 600 mm * 6 mm / 10 mm / 20mm
- Uncoated board size – 1245 mm * 600 mm * 10 mm / 20mm
Delivery £25 within Great Britain (mainland only)
Compare -
£86.10 – £97.63
Touchstat is a low profile programmable thermostat that sits elegantly in any wall of the home.
Equipped with both a floor and an air sensor, Touchstat works with SunStone underfloor heating.
The touchscreen interface is intuitive and allows you to program your heating in accordance with your lifestyle, with an option to override the program when needed. Setting up the thermostat is quick and easy, simply tell Touchstat your living patterns, for instance, the time you get up, leave for work, return from work, go to bed etc. and it will do the rest for you. Alternatively, Touchstat can be put into manual mode, where it will ask you for a fixed temperature at which it will remain until instructed otherwise.
With a simple touch of the screen, the new holiday mode allows you to manage your heating simply and efficiently, preventing condensation when you are out of the house for long periods of time.
Size Guide
- Dimensions – 86 mm * 86 mm * 44 mm
- Installation Depth – 50mm back box
Warranty
- Check
Delivery £25 within Great Britain (mainland only)
Compare
 |
